Hot water wood burning stove - FÉNIX boiler

UNIQUE DESIGN

Dimensions:

• length 876 mm
• width 621 mm
• height 1585 mm
• chimney diameter 160 mm
• cold heating water inlet - 6/4"
• Hot water outlet - 6/4"

Technical data:

• rated output 14,8 kW
• short-term output max. 28 kW
• 85% efficiency
• heat output to water 13.32kW
• flue gas volume flow 13.8g/s
• flue gas temperature 139°C
• max.operating overpressure 0,2MPa
• min. chimney draft 10Pa
• burning time up to 12 hours
• max. outlet temperature 90°C
• distance of adjacent combustible materials: leteral 400 mm
• distance of adjacent combustible materials: rear 400 mm
• distance of adjacent combustible materials: frontal 1000 mm
• distance of adjacent combustible materials: upper 400 mm
• fuel consumption per hour 4 kg
• water volume 65 l
• weight 278 kg

Additional information: 

• efficient burning of wood pieces up to 70 cm in length
• very efficient and economical heating - burning time up to 12 hours
• optimal water heating by circulation in the system
• minimum thermal stress on the casing due to water circulation
• the outer shell of the combustion chamber and the shell of the secondary heat exchanger are encased in a layer of thermal insulation, which prevents heat leakage and increases the efficiency of the Phoenix boiler 

• The ash is removed from the combustion chamber approximately once every 10 days.
• Cleaning of the internal parts approximately once every 4-6 weeks.
• Optimal heating of the heating water is guaranteed by preheating in the intermediate shell of the furnace and reheating in the heat exchanger.
• Absence of any electronics and simplicity of operation
• Both forced and gravity circulation
• No loss of hot ash also means minimal heat loss in the heating system
• The construction and design of the Phoenix is protected by patent number 23593
• The double-walled combustion chamber is protected against scorching by water circulation
• The Fénix boiler represents a long-term investment in a heating unit guaranteed by the manufacturer
• Certification by the Engineering Testing Institute Brno, s.p.
• The best efficiency in heating is achieved together with the installation of Fénix accumulation vessels

At the same time we would like to offer you pellets and briquettes that are suitable for burning in the Fénix boiler.